S & G Light - Base 34" or 48"
The Industrial Steam House Light
We know you...
You’re looking for a stunning light that will be a conversation piece in your home, office, mancave, or restaurant. You want something industrial and incredible looking that will fit in with your decor……but you don’t want to remortgage the house because of the cost.
This piece was created for you.
Pulleys. Raised lettering. Cloth-covered wire. Cast metal. Industrial-looking through and through. We combined these together and designed a new light that exemplifies so many things in the industrial workplace. Hang this above your dining room table, kitchen island, or pool table. Or hang it anywhere you'd like.
Measuring 34” long and 5-1/4” wide (or we can make a larger 48” version), the top canopy can be hung from the ceiling or attached directly against the ceiling (chain is included). It is made of cast aluminum and finished with a grunge cast finish that is loaded with surface imperfections.
The dual 8" solid copper shades match the appearance of the entire piece. Bulbs are not included. The 3” grunge pulleys are also a perfect match. Our housings have the appearance of old industrial gears and plates. Nice. You won't find a light like this anywhere else.
As shown in photos, the distance from the top of the light to the bottom is approximately 19" when mounted flush to the ceiling. Of course, the shades can be raised or lowered however you'd like. This custom-made light is made to order and does not have a ground.
We can set up this light to mount in many configurations. The photo in this listing shows our basic Hanging Options...
Triangle-Mount: The chains on each side will be attached to the center ceiling canopy. One (1) ceiling canopy, 3-ft of chain on each side is included. Wire can either go straight up or weaved through one of the chains.
Straight-Mount: The chain on each side will go straight up and attach to a hook. Included is one (1) ceiling canopy, two (2) ceiling hooks, 3-ft of chain on each side.
Flush-Mount: This configuration allows you to mount directly to the ceiling. No chains, hooks, or ceiling canopy included because you won't need them. We do include two (2) Heavy-Duty Snap Toggles for mounting purposes. One for each end.
Custom-Mount: Contact us with any questions. For some custom mounts such as high ceilings, cathedral ceilings, etc., there may be an additional charge for the extended length of the power cord and chain. Please contact us with details and we can try to help.
Shipping cost? It’s free (in the continental United States) ….we’ll take care of the cost of shipping. If you haven’t clicked on the “Buy it Now” button yet, you might want to. We may not be making many more of these.
This is a custom-made light that is made to order. Please allow approximately 14-28 days to create and ship depending on our workload. During busy times, we appreciate your patience because it might take a little longer than normal. If you need a rush order, please contact us and we will check our schedule. Thanks.
The Industrial Steam House Light
We know you...
You’re looking for a stunning light that will be a conversation piece in your home, office, mancave, or restaurant. You want something industrial and incredible looking that will fit in with your decor……but you don’t want to remortgage the house because of the cost.
This piece was created for you.
Pulleys. Raised lettering. Cloth-covered wire. Cast metal. Industrial-looking through and through. We combined these together and designed a new light that exemplifies so many things in the industrial workplace. Hang this above your dining room table, kitchen island, or pool table. Or hang it anywhere you'd like.
Measuring 34” long and 5-1/4” wide (or we can make a larger 48” version), the top canopy can be hung from the ceiling or attached directly against the ceiling (chain is included). It is made of cast aluminum and finished with a grunge cast finish that is loaded with surface imperfections.
The dual 8" solid copper shades match the appearance of the entire piece. Bulbs are not included. The 3” grunge pulleys are also a perfect match. Our housings have the appearance of old industrial gears and plates. Nice. You won't find a light like this anywhere else.
As shown in photos, the distance from the top of the light to the bottom is approximately 19" when mounted flush to the ceiling. Of course, the shades can be raised or lowered however you'd like. This custom-made light is made to order and does not have a ground.
We can set up this light to mount in many configurations. The photo in this listing shows our basic Hanging Options...
Triangle-Mount: The chains on each side will be attached to the center ceiling canopy. One (1) ceiling canopy, 3-ft of chain on each side is included. Wire can either go straight up or weaved through one of the chains.
Straight-Mount: The chain on each side will go straight up and attach to a hook. Included is one (1) ceiling canopy, two (2) ceiling hooks, 3-ft of chain on each side.
Flush-Mount: This configuration allows you to mount directly to the ceiling. No chains, hooks, or ceiling canopy included because you won't need them. We do include two (2) Heavy-Duty Snap Toggles for mounting purposes. One for each end.
Custom-Mount: Contact us with any questions. For some custom mounts such as high ceilings, cathedral ceilings, etc., there may be an additional charge for the extended length of the power cord and chain. Please contact us with details and we can try to help.
Shipping cost? It’s free (in the continental United States) ….we’ll take care of the cost of shipping. If you haven’t clicked on the “Buy it Now” button yet, you might want to. We may not be making many more of these.
This is a custom-made light that is made to order. Please allow approximately 14-28 days to create and ship depending on our workload. During busy times, we appreciate your patience because it might take a little longer than normal. If you need a rush order, please contact us and we will check our schedule. Thanks.
The Industrial Steam House Light
We know you...
You’re looking for a stunning light that will be a conversation piece in your home, office, mancave, or restaurant. You want something industrial and incredible looking that will fit in with your decor……but you don’t want to remortgage the house because of the cost.
This piece was created for you.
Pulleys. Raised lettering. Cloth-covered wire. Cast metal. Industrial-looking through and through. We combined these together and designed a new light that exemplifies so many things in the industrial workplace. Hang this above your dining room table, kitchen island, or pool table. Or hang it anywhere you'd like.
Measuring 34” long and 5-1/4” wide (or we can make a larger 48” version), the top canopy can be hung from the ceiling or attached directly against the ceiling (chain is included). It is made of cast aluminum and finished with a grunge cast finish that is loaded with surface imperfections.
The dual 8" solid copper shades match the appearance of the entire piece. Bulbs are not included. The 3” grunge pulleys are also a perfect match. Our housings have the appearance of old industrial gears and plates. Nice. You won't find a light like this anywhere else.
As shown in photos, the distance from the top of the light to the bottom is approximately 19" when mounted flush to the ceiling. Of course, the shades can be raised or lowered however you'd like. This custom-made light is made to order and does not have a ground.
We can set up this light to mount in many configurations. The photo in this listing shows our basic Hanging Options...
Triangle-Mount: The chains on each side will be attached to the center ceiling canopy. One (1) ceiling canopy, 3-ft of chain on each side is included. Wire can either go straight up or weaved through one of the chains.
Straight-Mount: The chain on each side will go straight up and attach to a hook. Included is one (1) ceiling canopy, two (2) ceiling hooks, 3-ft of chain on each side.
Flush-Mount: This configuration allows you to mount directly to the ceiling. No chains, hooks, or ceiling canopy included because you won't need them. We do include two (2) Heavy-Duty Snap Toggles for mounting purposes. One for each end.
Custom-Mount: Contact us with any questions. For some custom mounts such as high ceilings, cathedral ceilings, etc., there may be an additional charge for the extended length of the power cord and chain. Please contact us with details and we can try to help.
Shipping cost? It’s free (in the continental United States) ….we’ll take care of the cost of shipping. If you haven’t clicked on the “Buy it Now” button yet, you might want to. We may not be making many more of these.
This is a custom-made light that is made to order. Please allow approximately 14-28 days to create and ship depending on our workload. During busy times, we appreciate your patience because it might take a little longer than normal. If you need a rush order, please contact us and we will check our schedule. Thanks.